Table of Contents
Advertisement
The Tape Monitor is an override. Pressing the TAPE Button (12) connects the output of your tape deck to the
Kandy, overriding the selected input. However, the selected input is left connected to the recording input of your
tape deck. If you have a suitable tape deck, this facility enables you to record a programme whilst monitoring its
playback.
When the TAPE Button is depressed, the TAPE Indicator light (11) glows and the selected source Indicator
remains illuminated.
The input selector remains functional when the Tape Monitor is ON, allowing a range of sources to be recorded.
Pressing the TAPE Button toggles between Tape Monitor ON and OFF.
R
E
M
O
T
E
H
A
N
D
S
E
T
R
E
M
O
T
E
H
A
N
D
S
E
T
The Kandy Integrated Amplifier MKIII Remote Handset uses two AA size 1.5V batteries. These are housed in the
battery compartment on the underside of the handset.
Carefully remove the battery compartment cover and insert the supplied batteries in place observing polarity.
Replace the cover. The handset is now ready for use.
The front panel controls of the Kandy Integrated Amplifier are replicated on the remote handset.
1
2
3
4
5
6
7
8
1
The TAPE Button (1) connects the Tape Deck In and Out.
2
The POWER Button (2) puts the amplifier in and out of Standby. (MODE light GREEN and RED)
3
The MODE Button (3) mutes and un-mutes the output level by 20dB. (MODE light AMBER)
4
The MUTE Button (4) fully mutes and un-mutes the output of the amplifier. (MODE light flashing RED)
5, 6
The VOLUME Buttons (5 & 6) adjust the output volume level (Increase & Decrease).
7, 8
The INPUT Buttons (7 & 8) march through the input sources (Forward & Back).
Roksan Audio ltd
CLASSIFICATION: General Use
All specifications are liable to change without notice. E&OE
TAPE
POWER
MODE
MUTE
VOLUME (+)
VOLUME (-)
INPUT(FORWARD)
INPUT (BACK)
3
7
8
Kandy Integrated Amplifier User Manual
Page 8 of 11
2
4
5
6
1
Version 3.3
ENGLISH
Hide quick links:
Advertisement
Table of Contents
