Pro-Form 980 AUDIO TRAINER User Manual page 9

6. Attach the Left Upright (81) to the Base (90) with
a 3/8" x 3 1/2" Patch Bolt (8), a 3/8" x 1 1/2"
Patch Bolt (6), and two 3/8" Star Washers (12)
in the indicated locations. Partially tighten the
Patch Bolts until the heads of the Patch Bolts
touch the Base; do not fully tighten the Patch
Bolts yet.
With the help of a second person, tip the tread-
mill so that the Base (90) is flat on the floor.
7. Orient the Crossbar (82) so that the indicated
bump is in the position shown. Attach the
Crossbar to the Uprights (81, 83) with four 1/4" x
5/8" Bolts (3); do not tighten the Bolts yet.
Note: The bump will go into a hole in the Right
Upright.
8. Identify the Right Handrail (78), which is marked
with a sticker. Insert the end of the Wire
Harness (84) into the hole in the bottom of the
Right Handrail and out of the hole in the top.
6
90
8
12
6
7
3
81
8
9
81
82
3
Bump
83
84
78