Using A Power Supply Different From The Standard One; Cleaning The Unit - M2TECH JOPLIN User Manual

M2Tech
JOPLIN
384 H /32bit ANALOG-TO-DIGITAL CONVERTER
k z
REVISION P A – SEPTEMBER 2012 www.m2tech.biz
R

10. Using a power supply different from the standard one

The Joplin comes with a 15V/1A wall adapter. This unit has been tested to comply with
the Joplin's power and supply quality requirements and allows for very high performance.
Nevertheless, a better (and more expensive) unit could squeeze the last degree of
performance from the Joplin.
M2Tech manufactures a high-quality, battery-powered power supply to be used with the
Joplin, called P A LMER POWER ST A TION
(www.m2tech.biz/palmer.html ). It is the best choice
to push the Joplin performance to the highest level possible.
We advice users that using a different power supply than the one included in the package
or the P A LMER POWER ST A TION will void the warranty: no warranty claim will be
acknowledged for damages due to the use of power supply different from the one included
in the package or other units specifically designed by M2Tech for the Joplin.
Should the user decide to use another power supply, the specifications listed in section 12
must be observed.

11. Cleaning the unit

The Joplin should be cleaned with a soft, damp cloth. Do not use alcohol or other cleaning
liquids to avoid damaging the unit.
Copyright © 2012, M2Tech Srl
38