Carton Contents - Generac Portable Products 2400PSI Owner's Manual

WARNING!
Read entire owner's manual before
you attempt to assemble or operate your new
pressure washer.
REMOVE PRESSURE
WASHER FROM
CARTON
• Remove the high pressure hose and parts box included
with pressure washer.
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat, then
remove all packing material.
• Roll pressure washer out of carton.

CARTON CONTENTS

Items in the carton include:
• Main Unit
• Parts Box (includes the following):
• Oil Bottle
• Wire Form
• Goggles
• Nozzle Cleaning Kit
• O–Ring Maintenance Kit
• Owner's Manual
• Engine Manual
• Engine Warranty
• Emissions Control Warranty
• Warranty Card
• Spray Gun
• Adjustable Nozzle Extension
• High Pressure Hose
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helpline at 1–800–270–1408.
Generac Portable Products 2,400 PSI High Pressure Washer
To prepare your pressure washer for operation you
will need to perform these tasks:
• Lift and secure the handle and attach the wire form.
• Add oil to the engine.
• Add fuel to the fuel tank.
• Connect the high pressure hose to the spray gun and the
pump.
• Connect the water supply to the pump.
• Connect nozzle extension to gun.
Secure Handle and Wire Form
• Lift handle and slide locking caps over the mating handle
posts (Figure 1).
Figure 1 — Secure Handle
Lift handle and
slide locking
caps into place
• From rear of unit, insert wire form into the handle with
the longer arm positioned on the right. The hook should
resemble a "J" (Figure 2).
Figure 2 — Attach Wire Form to Handle (viewed from rear)
5
Longer arm of
wire form