Know Your Pressure Washer - Generac Portable Products 2400PSI Owner's Manual

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the location of the controls. Save this
manual for future reference.
High Pressure Outlet
Air Cleaner
Throttle Lever
Fuel Shut-off
Choke Lever
Recoil Starter
Adjustable Nozzle — Attached to the spray gun to provide
high pressure stream. Adjustable nozzle allows you to adjust force
of spray and spray pattern.
Air Cleaner — Dry type filter element limits the amount of dirt
and dust that gets in the engine.
Automatic Cool Down System — Cycles water through
pump when water reaches 140°-145°F. Warm water will
discharge from pump onto ground.
Chemical Injection Tube—Used to siphon chemical from the
detergent container to the pump.
Choke Lever — Used to prepare a cold engine for starting.
Fuel Sut-off — Used to control the flow of fuel to the engine.
Goggles — Always use the enclosed goggles or other eye
protection when running your pressure washer.
High Pressure Hose — Connect one end to water pump and
the other end to spray gun.
Generac Portable Products 2,400 PSI High Pressure Washer
High Pressure Hose
On/Off Switch
Adjustable Nozzle
High Pressure Outlet — Connection for high pressure hose.
Oil Fill — Oil input location.
On/Off Switch — Used to set engine in starting mode and stop
a running engine.
Pressure Control Knob — Varies the pressure of the high
pressure spray.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto cleaning
surface with trigger device. Includes safety latch.
Throttle Lever—Used to set engine in a slow or fast running
mode.
Water Inlet — Connection for garden hose.
4
Spray Gun
Goggles
Chemical Injection Tube
Pressure Control Knob
Pump equipped with
Automatic Cool Down
System
Water Inlet
Oil Fill