Carton Contents - Generac Portable Products 2400PSI Owner's Manual

WARNING!
Read entire owner's manual before
you attempt to assemble or operate your new
pressure washer.
REMOVE PRESSURE
WASHER FROM
CARTON
• Remove the high pressure hose and parts box included
with pressure washer.
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat, then
remove all packing material.
• Roll pressure washer out of carton.

CARTON CONTENTS

Items in the carton include:
• Main Unit
• Parts Box (which includes the following):
- Wireform
- High Pressure Hose
- Goggles
- Handle Assembly
- Handle Fastening Hardware
- Nozzle Cleaning Kit
- Owner's Manual
- Engine Manual
- Spray Gun
- Nozzle Extension
- Oil Bottle
- O-ring Maintenance Kit
If any of the above parts are missing or damaged, call the
pressure washer helpline at 1–800–270–1408.
Generac Portable Products 2,400 PSI High Pressure Washer
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helpline at 1-800-270-1408.
To prepare your pressure washer for operation, you
will need to perform these tasks:
• Attach the handle and wire form.
• Attach nozzle extension to spray gun.
• Connect the high pressure hose to the spray gun and the
pump and connect the water supply to the pump.
• Add oil to the engine crankcase.
• Add fuel to the fuel tank.
Attach Handle and Wire Form
NOTE: All assembly operations given in this section will
be described from the perspective of assembling the
pressure washer from the rear.
• Place the handle onto the handle supports already
connected to the main unit. Make sure the holes in the
handle align with the holes on the handle supports
(Figure 1).
Figure 1 — Attach Handle to Base
Make sure the
holes on the
handle are
aligned with the
holes on the
handle supports
NOTE: It may be necessary to move the handle supports
from side to side in order to align the handle so it will slide
over the handle supports.
5
Handle
Handle
Supports