HP xw8000 Specification page 38

QuickSpecs
Technical Specifications
Intel Pro 1000 MT NIC DC193A
DA-11506 North America — Version 11 — June 2, 2003
Dimensions
Connector
Controller
Memory
Data rates supported
Compliance
Bus architecture
Data path width
Data transfer mode
Hardware certifications
Power requirement
Boot ROM support
Network transfer rate
Environmental
Environmental
Management capabilities
Kit contents
6.4 x 4.8 x 0.8 inches (16.3 x 12.1 x 1.9 cm)
RJ-45
Intel 82540EM Gigabit Controller
Integrated 96 Kb frame buffer memory
10/100/1000 Mbps
IEEE 802.1A, 802.1P, 802.1P, 802.1Q, 802.2, 802.3, 802.3AB and 802.3u
compliant, 802.3x flow control
PCI 2.2
32-bit, 33/66 MHz bus interface
Bus-master DMA
FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS Mark for
European Union
1.48 watts @ +3.3V AUX supply with 5V tolerance
Yes
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T, 1000 Mbps
Operating temperature
Operating humidity
Operating temperature
ACPI, WOL and DMI 2.0, PXE 2.0, WfM 2.0, Intel PROset II utility
The Intel Pro 1000 MT NIC, CD containing Intel PROset II NIC drivers, quick
install guide, product warranty statement
HP Workstation xw8000
32° to 131°F (0° to 55° C)
85% at 131° F (55° C)
32° to 131°F (0° to 55° C)
38