Kodak 3000 DV Plus User Manual page 20

A-61371 April 2010
10 Exposure Adjustment — adjusts the density of the image to be
printed during the Auto or Manual Exposure mode.
• Darker: supports darker image density.
• Lighter: supports lighter image density.
11 Multi-Print display — displays the number of prints to be made.
Also displays corresponding codes in the event of a malfunction or
paper misfeed. The blinking number in this display indicates the
print cycle in progress.
12 Multi-Print — used to input the number of prints to be made. This
function is only available in PR mode.
• 10: increases the number of prints to be made in increments of
10 (10, 20, 30 ...90, etc.)
• 1: increases the number of prints to be made in increments of 1
(1, 2, 3 ... 9, etc.)
13 Clear/Stop — clears the setting on the Multi-Print display, resets
the display to 1 or stops a multi-print cycle. This function is only
available in PR mode.
14 Start — starts the print (scan) process of the displayed image.
15 Indicators:
Misfeed/Call Kodak: lights up when a paper misfeed
or malfunction occurs.
Wait: lights when the scanner is initializing and the
Wai t symbol
printer is warming up.
Closure Failure: lights up if the printer cover is open.
Add Toner: blinks when the toner cartridge of the
printer is low and lights up when the cartridge is
completely out of toner.
Add Paper: lights up when the printer is not loaded
with the selected paper size or when the paper feeding
tray or paper cassette has run out of paper with Auto
Paper selected.
2-3