First Steps - Gigaset A130 User Manual

First steps

Check the pack contents
One Gigaset A130/AL130A/A230/AL230A base station, one mains adapter, one
Gigaset handset, one phone cord, two batteries, one battery cover, one user guide.
If you have purchased a model with multiple handsets, the package should contain
two batteries, a battery cover and a charging cradle with mains adapter for each addi-
tional handset.
Setting up the base station and charging cradle (if included)
◆
Set up the base station at a central location on a flat, non-slip surface in your house
or apartment. You can also mount the base station and charging cradle on the
wall.
◆
Pay attention to the range of the base station. This is up to 300 m in unobstructed
outdoor areas and up to 50 m inside buildings.
◆
The base station and charging cradle are designed for use in enclosed dry rooms
in a temperature range of +5 °C to +45 °C.
◆
Care: Wipe down the base station and handset with a damp cloth (no solvents) or
an antistatic cloth. Never use a dry cloth. This can cause static.
◆
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the risk
of marks on the surfaces cannot be completely ruled out.
◆
Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
◆
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
5
Connecting the base station
¤
First connect the mains
1
adapter .
¤
Then connect the telephone
2
jack and insert the cables
into the cable ducts.
Please note:
◆
The mains adapter must always
be connected, as the phone
will not operate without mains
connection.
◆
Use only the mains adapter
and phone cord supplied. Pin
connections on telephone
cables can vary.
◆
The answer machine (AL130A/
AL230A only) is ready for use
approx. 30 seconds after the
base has been connected.
Connecting the charging cradle (if included)
¤
Connect the flat plug to the power
2
supply
¤
Plug the mains adapter into the plug
1
socket
A130/A230
2 1
AL130A/AL230A
1 1
1 .
2
.
If you need to disconnect
the plug from the charg-
ing cradle, press the
3
release button and
4
disconnect the plug .
1
1
2 1
4
3