SpeakerCraft Eazy6 Owner's Manual

6-zone preamplifier

Table of Contents

Download this manual

OWNER'S MANUAL

Eazy6

6-Zone Preamplifier

Table of Contents

Need help?

Do you have a question about the Eazy6 and is the answer not in the manual?

Page 1 OWNER’S MANUAL Eazy6 6-Zone Preamplifier...
Page 2 • Expansion output for additional zones or source sharing with other amplifiers or receivers • Individual zone “Status” output It is possible for a zone to contain more than one pair of speakers. In which case, it may be necessary to use a SpeakerCraft Volume Control • Common “Status” output for each pair of speakers in that zone.
Page 3 EXPANSION If more than six zones are required, then two or more Eazy6 units can be linked together to achieve the number of zones required. Each link will require six pairs of RCA audio interconnects and one Cat-5 patchcord terminated with RJ-45 connectors.
Page 4 Learn Button for the IR connecting block is provided by the 12-volt accessory output of the Eazy6. A Cat-5 patchcord is used to send IR data to the common down, Off and All Off will then function as described in the source components via either Data port of the Eazy6.
Page 5 SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model is no longer available and cannot be repaired effectively, SpeakerCraft, at its sole option, may replace the unit with a cur- rent model of equal or greater value.