Installing Accessories - Konica Minolta magicolor 4695MF User Manual

Introduction
Note
Any damage to the machine caused by the use of accessories not
manufactured or supported by KONICA MINOLTA will void your
warranty.
This chapter provides information about the following accessories.
Dual In-Line
Memory Module
(DIMM)
Tray 3
Hard Disk Kit
CF Adapter
CompactFlash
Note
The hard disk kit and CF adapter cannot be installed to be used at the
same time.
Installing accessories always requires that the machine and
accessories are turned off and unplugged during installation.
302
256 MB, 512 MB DIMM
(DDR2-667 SO-DIMM, 166 MHz, 200pins, No ECC,
Unbuffered, CL=3)
Density : 512 Mbits
Organization : 64 Mwords x 8 bits
Lower feeder unit with 500-sheet tray included
40GB Hard Disk
Adapter for CompactFlash card
512 MB, 1GB, 2GB, 4GB
For details on the available options, refer to
http://printer.konicaminolta.com.
Introduction