Konica Minolta magicolor 4695MF User Manual page 291

Symptom
Printing
takes too
much time.
Blank pages
are printed.
Solving Other Problems
Cause
The machine is set to
a slow printing mode
(for example, thick
stock or transpar-
ency).
The machine is set to
power saving mode.
The job is very com-
plex.
There is not enough
machine memory.
A toner cartridge for a
different region or an
unapproved toner
cartridge is installed
(
Wrong Toner X
is displayed in the
message window).
If an error has been
detected during print-
ing job transmission
in the Copy mode, it
takes a while to pro-
cess the error and
resume the printing
operation.
One or more of the
toner cartridges are
defective or empty.
The wrong media is
being used.
Solution
It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
It takes time for printing to start in
power saving mode.
Wait. No action needed.
Install the optional memory to increase
the machine's memory capacity.
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific machine.
Wait. No action needed.
Check the toner cartridges. The image
will not print correctly or not at all, if the
cartridges are empty.
Check that the media type.
277