5 CONNECT DUCTWORK
the duct stops.
CAUTION:
damper operations. Seal connection with tape only.
PRUDENCE
du collet de la hotte. Ceci empêcherait le bon
fonctionnement du registre. N'utiliser que du ruban adhésif
pour assurer l'étanchéité du raccord.
6 CONNECT ELECTRICAL
WARNING:
with a ground wire, a ground must be provided by the
installer. When house wiring is aluminum, be sure to use
copper connectors.
AVERTISSEMENT
sont en aluminium, il faut prendre soin d'utiliser des con
approuvée par UL.
7 INSTALL DUCT COVERS
Mounting Screws
covers on top of the hood.
of the duct cover into the
impressions on the top of
the hood.
Installation Instructions
Do not use sheet metal screws at
Bottom
Notches
Duct Tape
Over Seam
and Screw
or bare ground lead.
connector.
wires are not pinched.
Phillips screws provided.
11
Air Flow
Screw
Duct Tape
Over Flange
Duct Stops