Install The Hood - GE Monogram ZV950 Installation Instructions Manual

3 INSTALL DUCT BRACKET
top.
Secure the bracket to the ceiling and wall:
and install wall fastener anchors.
screws and/or fasteners.

4 INSTALL THE HOOD

center.
3. Remove the hood from the wall.
The two lower holes can be enlarged to 3/8" if they did
enter studs. Tap anchors for wall fasteners into the bot
tom holes. Screws should be inserted by hand into the
screws or wall fastener screws.
overtighten screws.
Lower Mounting Holes
Installation Instructions
10
Pre-Tap
Side
Screw
Bracket Tabs
Screws
"B"
Screws
Pre-Tap
Side
Screw
"A"