Using The Mouse And The Lenovo Mouse Suite; Solving Usb Problems - Lenovo ScrollPoint Pro Mouse User Manual

Installing the mouse in USB mode
If you are currently using a PS/2 mouse, you must first turn off your computer prior to removing this
mouse. At this time you can plug in your mouse and restart your computer. If a message displays
indicating that you do not have a PS/2 mouse connected, ignore the message and continue.
To Install the mouse in USB mode using Windows 2000, complete the following procedure:
1. Plug the USB (rectangular) connector from the mouse into the USB connection on the computer. The
Found New Hardware window will open, followed by the Add New Hardware Wizard window.
2. Press Enter. The What do you want Windows to do window opens.
3. Select Search for the best driver for your device.
4. Press Enter. The Windows will search for new drivers window opens.
5. Press Enter. Your computer will display the location of the driver.
6. Press Enter. The Windows has finished installing the software that your new hardware device
requires window opens.
7. Press Enter to complete the installation.
To install the mouse in USB mode using Windows XP, complete the following procedure:
1. Plug the mouse connector into the computer USB connector.
2. The New Hardware Found window will open stating Windows is installing the software for your
new hardware. Windows XP will automatically install the proper device drivers to operate your new
mouse.
Note: Do not connect the mouse to a USB connector on a ThinkPad computer until the Windows XP
desktop displays.

Using the mouse and the Lenovo Mouse Suite

The Leonovo ScrollPoint Pro Mouse, has multiple functions and features such as Zoom and
Auto-scrolling, which help you to increase your productivity. You can also assign frequently used
functions or shortcuts to the mouse buttons by using the tabs in the Mouse Suite Software.
To start the Mouse Suite Software, complete the following procedure:
1. Double click the mouse icon in the Windows system tray or right-click the icon to view the context
menu, and then click Adjust Mouse Properties.
If the mouse icon is not in the Windows system tray, click Start > Control Panel > Mouse or Start >
Settings > Control Panel > Mouse to start using the software.
2. The main window opens with several tabs. Click each tab to view related settings. Under each tab
there are three buttons:
v OK - To save your settings and close the dialog.
v Cancel - To exit the window without saving.
v Apply - To have your changes take effect without closing the window.
For more information on customizing the settings, click Help in the lower right corner of the Lenovo
Mouse Suite Software window.

Solving USB problems

This section contains information on solving problems with USB connectivity.
3-2
Combined Mouse User's Guide