Installation – Manual 3.5 kg dryer
8
Dryer position
The Manual 3.5 kg dryer is front venting. The air
is taken in through the grill at the rear of the dryer
and vented out through the grill in the door.
The dryer should be positioned so that the air
intake at the rear is unrestricted. The minimum
clearance needed from the wall is 50 mm.
Included with this dryer are two plastic spacers.
Fitting these on the rear of the dryer will ensure
the dryer is correctly positioned away from the wall.
Use screws provided to fit the spacers. (As shown
in the diagram.)
Directional outlet grill
The outlet grill can be rotated to direct the exhaust
air. It should be adjusted so that it points towards
an external window or door.
Specifications
Capacity (Dry)
Dimensions
Width
Depth
Height
Electrical
Volts
Hz
Amps
Note: if the electrical supply cord is damaged it must be replaced by the manufacturer or its
service agent or similar qualified person in order to avoid a hazard.
Electronic and
Manual dryers
4.5 kg (Dry)
565 mm
560 mm
790 mm
NZ/AUS
230/240
50
8.0
Fig. 10 Spacers
Fig. 11 Directional outlet grill
Manual dryers
3.5 kg (Dry)
565 mm
440 mm
790 mm
NZ/AUS
230/240
50
8.0