Table of Contents
Advertisement
Available languages
Available languages
3
To exit the loop and to continue the title, press the button OUT. The LEDs of the buttons IN and OUT will
stop flashing but will remain on to indicate that a loop has been memorized and is ready to be engaged.
By selecting another title it is also possible to exit the loop.
4
To restart the loop, press the button RELOOP. The buttons IN and OUT will be flashing again.
5
To program another loop, redefine the starting and the end point with the button IN and OUT.
6.13 Selecting repeat functions
With the button REPEAT two different repeat functions can be selected:
• first actuation of the button: continuous repeat of the selected title (indication "REPEAT 1")
• second actuation of the button: continuous repeat of all titles of the CD (indication "REPEAT ALL")
• third actuation of the button: return to normal play
6.14 Programming an individual title sequence
For playing selected titles in a certain order, an individual title sequence with up to 20 titles can be
programmed. This sequence will be deleted by ejecting the CD or switching the unit off and on again.
1
In pause mode, press the button PGM to activate the programming mode. The display indicates
"PROGRAM" and the first memory location number P-01.
2
Use the buttons
sequence. In programming mode, the folder navigation is deactivated. The title name is not indicated.
3
After the title selection, press the button PGM to confirm the selection. The display will show the second
memory location number P-02.
4
Proceed in the same way for all further titles until the title sequence has been programmed.
5
To start the playback of the title sequence, press the button
location number P-01. The title name is not indicated.
6
To add further titles to the title sequence, follow steps 1 to 5.
7
To delete the title sequence and to continue normal play, press the button
and keep the button PGM pressed until the insertion "PROGRAM" will be extinguished.
7 CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents! There are no serviceable parts inside the device. Maintenance and service operations
are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
8 TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Type:
Available disc:
Available storage media:
Pitch adjustment:
Display:
Distortion:
S/N ratio:
Frequency range:
Analog audio output:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 27.05.2009 ©
and
or the control FOLDER/TRACK SEARCH to select the first title for the title
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
115/230 V AC, 50/60 Hz ~
30 W
double CD/USB/SD player
CD/-R/-RW in CD-DA and MP3 formats (8 and 12 cm)
USB devices and SD(HC) cards (max. 32 GB)
±4 %, ±8 %, ±16 %
elapsed time, remain time
0.09 %
70 dB
20-20,000 Hz
2x stereo RCA/ 2 V
483 x 260 x 97 mm (player units), 483 x 85 x 90 mm (control unit)
5 kg
. The display will show the first memory
32/32
to switch to pause mode
00047144.DOC, Version 1.0
Advertisement
Table of Contents
