Pitch Adjustment; Playing A Continuous Loop; Selecting Repeat Functions; Selecting Random Play - Omnitronic CMP-102 User Manual

6.9 Pitch adjustment

1. With the rotary control PITCH +/- the playback speed can be adjusted variably up to ±24 %. First, the
control must be activated with the button PITCH (green LED lights). Then turn the control to the left to
decrease the pitch, turn it to the right to increase the pitch. The pitch percentage is indicated in the
display.
2. With the buttons PITCH +/- on the remote control, the playback speed can be adjusted in 1% steps up to
±24 %. The rotary control PITCH +/- on the player must be deactivated. Press the button "–" to decrease
the pitch step by step and the button "+" to increase the it. The pitch percentage is indicated in the
display.

6.10 Playing a continuous loop

A section within a title can be repeated as a seamless continuous loop as many times as desired. This loop
can be overwritten at any time and is deleted when selecting another title, changing the CD, or switching the
unit off and on again.
1. During playback shortly actuate the button IN when the desired starting point of the loop is reached.
2. Shortly actuate the button OUT when the desired end point of the loop is reached. The section between
the starting point and the end point of the loop is continuously repeated.
3. To exit the loop and to continue the title, press the button OUT.
4. To restart the loop, press the button RELOOP.

6.11 Selecting repeat functions

With the button REPEAT three repeat functions can be selected:
• first actuation of the button: continuous repeat of the selected title (indication 1)
• second actuation of the button: continuous repeat of all titles in the selected folder with MP3 CDs (indication F)
• third actuation of the button: continuous repeat of all titles of the CD (indication A)
• fourth actuation of the button: return to normal play

6.12 Selecting random play

To activate random play, press the button
return to normal play, press the button once again (LED extinguishes).

6.13 Programming an individual title sequence

For playing selected titles in a certain order, an individual title sequence with up to 20 titles can be
programmed for audio CDs. This sequence will be deleted by ejecting the CD or switching the unit off and on
again. For MP3 CDs this function is not available.
1. In pause mode, press the button PGM on the player or PROGRAM on the remote control to activate the
programming mode. The display indicates the first memory location number P01.
2. Use the buttons
3. After the title selection, press the button PGM or PROGRAM to confirm the selection. The display will
show the second memory location number P02.
4. Proceed in the same way for all further titles until the title sequence has been programmed.
5. To start the playback of the title sequence, press the button
location number P01.
6. To add further titles to the title sequence, follow steps 1 to 5.
7. To delete the title sequence and to continue normal play, keep the button PGM or PROGRAM pressed
until the insertion P will be extinguished.
and to select the first title for the title sequence.
(LED lights). The titles are now played in random order. To
. The display will show the first memory
28/30 00052162.DOC, Version 1.0