Table of Contents
Advertisement
Available languages
Available languages
6.10 Matching the beat between two titles (Pitch Bend)
With the function pitch bend, the beat of the current title can be matched (synchronized) to the beat of a
music piece playing on another player. Thus the rhythm will not be interrupted while crossfading from one
title to another. Unlike the adjustment with the slide control PITCH this function will temporarily increase or
decrease a title's speed during playback.
1
First use the slide control PITCH to adjust the same number of beats (BPM) for both music pieces.
2
Then synchronize the beats of the two music pieces by turning the rotary wheel. The function fast
forward/reverse must be deactivated. The change of speed depends on the turning speed of the wheel:
Rotating the wheel in a clockwise direction will increase your title speed and rotating the wheel in a
counterclockwise direction will decrease your title speed. When you stop turning the wheel the speed will
automatically return to its previously set speed.
3
Alternatively to the rotary wheel you can also use the buttons PITCH BEND for matching the beat. As
long as the button + or - is kept pressed, the title is played 16 % faster or slower. As soon as you release
the buttons PITCH BEND the BPM will automatically return to normal.
6.11 Playing a continuous loop
A section within a title can be repeated as a seamless continuous loop as many times as desired. This loop
can be overwritten at any time and is deleted when selecting another title, changing the CD or switching the
unit off and on again.
1
• Setting the starting point "on the fly": In play mode, shortly actuate the button IN (LED lights blue)
when the desired starting point of the loop is reached. Playback is not interrupted.
the display.
• Setting the starting point precisely: To set the starting point precisely to 1 frame (1/75 second) set
the unit to pause and use the rotary wheel to go to the exact spot (the function fast forward/reverse
must be deactivated). The current spot is constantly repeated. Shortly actuate the button IN to set the
starting point.
2
• Setting the end point "on the fly": In play mode, shortly actuate the button OUT when the desired
end point of the loop is reached. The section between the starting point and the end point of the loop is
continuously repeated. The LEDs of the buttons IN and OUT will be flashing and
display.
• Setting the end point precisely: To set the end point precisely to 1 frame (1/75 second) set the unit
to pause and use the rotary wheel to go to the exact spot (the function fast forward/reverse must be
deactivated). The current spot is constantly repeated. Shortly actuate the button OUT to set the end
point. The section between the starting point and the end point of the loop is continuously repeated.
3
To exit the loop and to continue the title, press the button OUT. The LEDs of the buttons IN and OUT will
stop flashing but will remain on to indicate that a loop has been memorized and is ready to be engaged.
By selecting another title it is also possible to exit the loop.
4
To restart the loop, press the button RELOOP. The buttons IN and OUT will be flashing again.
5
To program another loop, redefine the starting and the end point with the button IN and OUT.
6.12 Selecting repeat functions
With the button REPEAT two different repeat functions can be selected:
• first actuation of the button: continuous repeat of the selected title (indication "REPEAT 1")
• second actuation of the button: continuous repeat of all titles of the CD (indication "REPEAT ALL")
• third actuation of the button: return to normal play
6.13 Programming an individual title sequence
For playing selected titles in a certain order, an individual title sequence with up to 20 titles can be
programmed. This sequence will be deleted by ejecting the CD or switching the unit off and on again.
1
In pause mode, press the button PGM on the player or PROGRAM on the remote control to activate the
programming mode. The display indicates "PROGRAM" and the first memory location number P-01.
2
Use the buttons
sequence. In programming mode, the folder navigation is deactivated. The title name is not indicated.
3
After the title selection, press the button PGM on the player or PROGRAM on the remote control to
confirm the selection. The display will show the second memory location number P-02.
4
Proceed in the same way for all further titles until the title sequence has been programmed.
5
To start the playback of the title sequence, press the button
location number P-01. The title name is not indicated.
and
or the control FOLDER/TRACK SEARCH to select the first title for the title
. The display will show the first memory
29/30
is indicated on
is indicated on the
00047149.DOC, Version 1.0
Advertisement
Table of Contents
