Playing A Continuous Loop; Selecting Repeat Functions; Selecting Random Play; Programming An Individual Title Sequence - Omnitronic DMP-202 User Manual

6.11 Playing a continuous loop

A section within a title can be repeated as a seamless continuous loop as many times as desired. This loop
can be overwritten at any time and is deleted when selecting another title, changing the data carrier, or
switching the unit off and on again.
1
During playback shortly actuate the button IN when the desired starting point of the loop is reached.
2
Shortly actuate the button OUT when the desired end point of the loop is reached. The section between
the starting point and the end point of the loop is continuously repeated.
3
To exit the loop and to continue the title, press the button OUT.
4
To restart the loop, press the button RELOOP.
5
To program another loop, redefine the starting and the end point with the buttons IN and OUT.

6.12 Selecting repeat functions

With the button REPEAT two repeat functions can be selected:
• first actuation of the button: continuous repeat of the selected title (indication 1)
• second actuation of the button: continuous repeat of all titles of the CD (indication A)
• fourth actuation of the button: return to normal play

6.13 Selecting random play

To activate random play, press the button
To return to normal play, press the button once again (LED extinguishes).

6.14 Programming an individual title sequence

For playing selected titles in a certain order, an individual title sequence with up to 20 titles can be
programmed for audio CDs. This sequence will be deleted by ejecting the CD or switching the unit off and on
again.
1
In pause mode, press the button PROG to activate the programming mode. The display indicates the
first memory location number P01.
2
Use the buttons
3
After the title selection, press the button PROG to confirm the selection. The display will show the
second memory location number P02.
4
Proceed in the same way for all further titles until the title sequence has been programmed.
5
To start the playback of the title sequence, press the button
location number P-01
6
To add further titles to the title sequence, follow steps 1 to 5.
7
To delete the title sequence and to continue normal play, keep the button PROG pressed until the
insertion P will be extinguished.
(red LED lights). The titles are now played in random order.
and to select the first title for the title sequence.
. The display will show the first memory
22/24 00071450.DOC, Version 1.0