Setting Up Print Spools On A Cluster; Setting Up An Appletalk Share; Installing The Appletalk Protocol - HP NAS 2000s Quick Start Manual

http://www.microsoft.com/technet/prodtechnol/windowsserver200
3/technologies/fileprint/default.mspx
The link for "Checklist: Setting up a Printer" is particularly
useful, and is also available via the online Windows Storage
Server 2003 help by clicking Start > Help and Support, and
then searching on "Checklist: Setting up a Printer."

Setting up print spools on a cluster

The following Microsoft Q article provides step-by-step
instructions for setting up print spools on a cluster:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q197046

Setting up an AppleTalk share

The following information is an addendum to the chapter,
"Folder, Printer, and Share Management," in the NAS
Administration Guide.
AppleTalk shares can be set up only after AppleTalk Protocol and
File Services for Macintosh have been installed on the NAS
server.
Note:
as data loss can occur due to local memory use.

Installing the AppleTalk Protocol

To install the AppleTalk Protocol:
1. From the desktop of the NAS server, click Start, navigate to
Settings-Network Connections. Right-click Local Area
Connection, and then click Properties.
2. Click Install. The Select Network Component Type dialog
box is displayed.
Figure 1
Type dialog box.
18
AppleTalk shares should not be created on clustered resources
is an example of the Select Network Component
NAS Service Release 2 Quick Start Guide