Safety Precautions - Belkin F1DN102V User Manual

OVERVIEW
Table of Contents SECTIONS

Safety Precautions

Please read the following safety precautions carefully before using the
Belkin Secure Flip KVM Switch:
• Before cleaning, disconnect the product from DC
power.
•
Be sure not to expose the product to excessive
humidity.
• Be sure to install the product on a clean secure surface.
• Do not place the DC power cord in a path of foot traffic.
•
If the product is not used for a long period of time,
remove the product's wall-mount power supply from
the main jack.
•
The product should be stored and used only in
temperature and humidity controlled environments as
defined in the product's environmental specifications.
• The wall-mount power supply used with this product
should be the model supplied by the manufacturer or
an approved equivalent provided by Belkin or an
authorized service provider. The use of improper power
source will void product warranty
Belkin® Secure 2 port Flip DVI-D/VGA/DP KVM Switch User Manual
1 2 3 4
•
If one of the following situations occurs, get the product
checked by a qualified service technician:
The product's power supply is overheated, damaged,

broken, causes smoke or shortens the main power socket.
Liquid penetrates the product's case.

The product is exposed to excessive moisture or water.

The product is not working properly even after carefully

following the instructions in this user's manual.
The product has been dropped or is physically damaged.

The product has obvious signs of breakage or loose

internal parts.
Product contains internal battery. Battery is non-

replaceable. Never attempt to replace battery as any
attempt to open product enclosure would permanently
damage the product.
7
5 6 7