Brightness Control - Honda 2011 CR-Z Owner's Manual

Brightness Control

Control Knob
Operating the Switches Around the Steering Wheel
When the parking lights are turned on and the
ignition switch is in ON , you can use the
II
brightness control knob to adjust instrument
panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beeper when the brightness
reaches minimum or maximum. The multi-
information display will return to its original
state several seconds after you adjust the
brightness.
■ Brightness Level Indicator
The brightness level is shown on the multi-
information display while you are adjusting it.
As the brightness level increases to the right,
the instrument panel gets brighter.
2011 CR-Z
Brightness Control
Brightness Control
The brightness of the instrument panel varies
according to whether the headlights are on or off.
The instrument panel dims to reduce glare when
you turn the light switch to or
exterior lights are on with the light switch in AUTO
position.
Pressing either (information) button
switches the display.
If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This
cancels the reduced instrument panel brightness
when the parking lights are on.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
QRG
, or the
TOC
Index
Home
115