Starting To Drive - Honda 2011 CR-Z Owner's Manual

Honda 2011 cr-z
Hide thumbs Also See for 2011 CR-Z:
Table of Contents

Advertisement

When Driving
QRG
TOC

Starting to Drive

Automatic transmission (CVT) model
1.
Keeping your right foot on the brake pedal, release the parking brake. Check
that the brake system indicator has gone off.
Parking Brake
2.
Put the shift lever in
3.
Gradually release the brake pedal and gently depress the accelerator pedal to
pull away.
Index
Home
198
Starting the Engine
3. Turn the ignition switch to START
without depressing the accelerator pedal.
P.219
D
R
. Select
when reversing.
Starting the Engine
Do not hold the key in START
seconds.
If the engine does not start right away, wait for
at least 10 seconds before trying again.
If the engine starts, but then immediately stops,
wait at least 10 seconds before repeating step 3
while gently depressing the accelerator pedal.
Release the accelerator pedal once the engine
starts.
The immobilizer system protects your vehicle from
theft. If an improperly coded key (or other device)
is used, the engine's fuel system is disabled.
Immobilizer System
2011 CR-Z
for more than 15
P.105

Advertisement

Table of Contents
loading

Table of Contents