Honda 2011 CR-Z Owner's Manual page 268

Blade
Checking and Maintaining Wiper Blades
4. Slide the wiper blade out from its holder
by pulling the tabbed end out.
5. Remove the retainer from the rubber blade
that has been removed, and mount it to a
new rubber blade.
Correctly align the rubber protrusion
and the retainer groove.
6. Slide the new wiper blade onto the holder
from the bottom end.
The tab on the blade should fit in the
indent of the wiper blade.
7.
Slide the wiper blade onto the wiper arm,
then push down the lock tab.
8. Lower the passenger side wiper arm first,
then the driver side.
2011 CR-Z
Changing the Front Wiper Blade Rubber
QRG
TOC
Index
Home
267