Opening And Closing The Windows - Honda 2011 CR-Z Owner's Manual

Opening and Closing the Windows

Opening/Closing the Power Windows
The power windows can be opened and closed when the ignition switch is in ON
, using the switches on the doors. The driver side switch can be used to open and
II
close both windows.
The main switch on the driver side must be switched off (not pushed in) to open
and close the passenger's window from the passenger side.
When the main switch is turned on (pushed in), you can only operate the
passenger's window from the driver's seat. Turn the main switch on if a child rides
in the passenger's seat.
Opening/Closing the Driver's Window
■
Passenger's
Main Switch
Window
On
Switch
Driver's
Off
Window
Switch
■ Automatic Operation
To open: Push the switch down firmly.
To close: Pull the switch up firmly.
The window opens or closes completely. To
stop the window at any time, push or pull the
switch briefly.
Manual Operation
■
To open: Push the switch down lightly.
To close: Pull the switch up lightly.
Release the switch when the window reaches
the desired position.
2011 CR-Z
Opening/Closing the Power Windows
WARNING
Closing a power window on someone's
hands or fingers can cause serious
injury.
Make sure your passenger is away from
the window before closing it.
The auto-reverse function stops sensing when
the window is almost closed to ensure that it fully
closes.
The power windows can be operated for up to 10
minutes after you turn the ignition switch off.
Opening either door cancels this function.
Auto Reverse
If a power window senses resistance when closing
automatically, it will stop closing, and reverse
direction.
The driver's window auto reverse function is
disabled when you continuously pull up the switch.
QRG
TOC
Index
Home
107