Brightness Control - Honda INSIGHT 2021 Owner's Manual

uuOperating the Switches Around the Steering WheeluBrightness Control

Brightness Control

Control Dial
210
When the power mode is in ON, you can use
the brightness control dial to adjust
instrument panel brightness.
Brighten: Turn the dial up.
Dim: Turn the dial down.
You will hear a beep when the brightness
reaches minimum or maximum. Several
seconds after adjusting the brightness, you
will be returned to the previous screen.
■
Brightness level indicator
The brightness level is shown on the driver
information interface while you are adjusting
it.
1Brightness Control
The brightness of the instrument panel will be
reduced when the following conditions:
•
The power mode is in ON.
•
The light switch is in any position other than OFF
and it is dark outside.
To cancel the reduced instrument panel brightness
when the exterior lights are on, turn the dial up until
the brightness display is up to max, the beeper
sounds.
The brightness can be set differently for when the
exterior lights are on, and when they are off.