Removing And Replacing A Mp/Scsi Board; Figure 4-24 Mp/Scsi Location - HP RP7405/7410 User Manual

Removing and Replacing a MP/SCSI Board

The MP/SCSI board is located in the rear of the chassis. The MP/SCSI board is a hot pluggable component.
There may be up to two MP/SCSI boards installed in a system.
Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
CAUTION
safety precautions could result in damage to the server.
Figure 4-24 MP/SCSI Location
Chapter 4
Removal and Replacement
Removing and Replacing a MP/SCSI Board
87