Bogen V35 Quick Manual

Power Vector
Modular
Amplifiers
Models V35, V60,
V100, V150, and V250
Bogen's Power Vector modular amplifiers offer a wide range of power levels from which to choose, with five
Description
models from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm)
impedance speaker systems.
Each model includes eight module bays for plug-in input modules and allows up to four levels of priority
between modules. Two module bays are capable of accepting plug-in signal-processing output modules.
Each module is controlled by an independent volume control with an associated signal/clip LED for signal
status. An 11-segment LED output meter monitors output signal level.
Each model includes a motorized master volume control that can be controlled using a remote volume
control panel (RVCP, sold separately).
• 5 models ranging from 35W to 250W each;
Features
a mixer-only version (VMIX) is also available
• Capable of handling 70V, 25V, 8-ohm, and 4-ohm
speaker loads
• 8 module bays
• Wide selection of advanced plug-in modules
(modules sold separately)
• 4 levels of priority between modules
• 2 module bays capable of handling plug-in signal-
processing output modules
• 11-segment LED output level meter monitors the
output level of the power amplifier with Avg./Peak
meter switch
• Motorized master volume control can be remotely
operated
• Lockable switch permits user to select either
transformer-coupled outputs or a direct low-
impedance output
• 5-position barrier strip, with clamping washers,
provides connections for speaker loads
• Bridging In/Out connector
• External access to priority mute buses
• Bridging jack and Mute terminals join multiple
Power Vector amps and mixers together
• Independent volume control for each of the eight
module bays
• Two-color LED for each channel indicates input
signal or clipping
• Bass and treble control with bypass switch (located
in module bay 6)
• 125 Hz Low Cut switch (located in module bay 6)
• Signal-processing insert jacks allow external
equipment to be inserted between the pre-amp
output and the power amp input
• Pre-EQ, unbalanced, buffered output signal
("post" all unit controls, but "pre" any external
"Insert" equipment connected)
• Grounded, unswitched AC convenience recepta-
cle with a 500W maximum capacity provided for
external equipment
• 8 module security cover/filler plates included with
amplifier (PVMC)
• Push-button remote volume control panel (Model
RVCP, sold separately)
• Security cover to selectively protect volume,
bass, and treble controls (Model PVSC, sold sep-
arately)
• Rack mountable (with rack mounting kit RPK87,
sold separately)
• 2 rack spaces high (3-1/2")
• Listed to UL Standard 60065 for U.S. and Canada
Specifications subject to change without notice.
© 2003 Bogen Communications, Inc.
54-8013-01E 1201