LanParty P45 Series User Manual page 88

3
BIOS Setup
REF to ACT Delay (tRFC)
The options are Auto, and 16 to 33.
Performance LVL (Read Delay)
The options are Auto, and 1 to 15.
Read Delay Phase Adjust
Refer to the following pages for more information on this submenu.
Write to PRE Delay (tWR)
The options are Auto, and 6 to 18.
Rank Write to Read (tWTR)
The options are Auto, and 6 to 18.
ACT to ACT Delay (tRRD)
The options are Auto, and 1 to 15.
Read to Write Delay (tRDWR)
This field is used to select the read to write delay time. Although this is
not a DRAM specified timing parameter, it is related to the routing
latencies on the clock forwarded bus. This is measured from the first
address bus slot which is not associated with part of the read burst.
Ranks Write to Write (tWRWR)
The options are 0 to 15.
Ranks Read to Read (tRDRD)
The options are 0 to 15.
Ranks Write to Read (tWRRD)
The options are 0 to 15.
8 8