LanParty P45 Series User Manual page 130

6
ATI CrossFire Technology
CrossFire Setup
1. Power-off the system and monitor then unplug the power cord.
2. Remove the screw of the bracket that is opposite the PCIE 2
slot then remove the bracket.
3. Align the CrossFire Edition graphics card (Master) above the
PCIE 2 slot then press it down firmly until it is completely seated
in the slot.
4. Secure the graphics card with the screw you removed in step 2.
130
Note:
The system board used in the following illustrations may not
resemble the actual board. These illustrations are for reference
only.
PCIE 2
CrossFire Edition
graphics card