Care Of Your Steam Mop - Shark STEAM POCKET SE400 Owner's Manual

Care of Your Steam Mop

fig. 12
fig. 13
AFTER USE AND STORAGE
1 When you have finished using the
Steam Mop, press either of the Steam
Control buttons two times to return
the mop to Standby mode. The LED
lights will return to flashing BLUE.
This stops the unit from steaming.
Unplug the cord from the outlet
and place the mop into the upright
position. Let the unit cool for 2-3
minutes.
Remove the micro-fiber cleaning pad
by releasing the quick fasteners and
using the lavender loop on the side
of the pocket, avoiding contact with
the hot pad or dirt. (fig. 12)
SE400_11_IB_E_111003_1.indd 9
fig. 14
2 Empty the water tank before storage.
Remove the water tank cap and
empty the tank over a sink. Replace
the water cap. (fig. 13)
3 To store the Shark
Pocket Mop hanging up, first
®
remove the head (after it has cooled
and the steam has been released)
then hang on a large hook. (fig. 14)
www.sharkclean.com
English
Pro Lite Steam
®
9
11-10-04 11:35 AM