Network Access - HP Bt500 User Manual

Chapter 2
The Headset Service now monitors the phone and displays a notification balloon over
the Bluetooth icon in the Notification area, at the far right of the taskbar when an
incoming call is detected.
2. Click the balloon to acknowledge the notification, and then, in the Incoming Call dialog
box, click the Accept button to accept the call.
The audio signal from the phone is re-routed to the audio output device (speakers or
earphones) on the computer, and the microphone on the computer provides the audio
input for the phone.
3. To reject the incoming call, when the Incoming Call dialog box is displayed, click the
Reject button.

Network Access

The Bluetooth Network Access service enables a remote Bluetooth device to access a
Local Area Network that is physically attached to this computer or allows a remote device
to become part of an ad hoc network provided by this computer.
After this computer has been configured to provide the Network Access service to other
Bluetooth devices, it will not be able to use the Bluetooth Network Access service
provided by another Bluetooth device without being re-configured. In other words, this
computer cannot be both a Bluetooth Network Access server and a Bluetooth Network
Access client at the same time.
Setup for Windows 2000 and Windows XP
TIP:
installed) it must be disabled and then re-enabled before the Bluetooth network
adapter can use it.
Before you begin, verify that the:
Bluetooth software is installed and enabled
Bluetooth device is turned on
Server has access to the Local Area Network (LAN). If the LAN provides Internet access,
the connection can be verified by using the server's browser to connect to the Internet
through the LAN.
40 HP bt500 Bluetooth USB 2.0 Wireless Printer Adapter
If Internet Connection sharing was previously enabled (before BTW was