Connecting The Network Cable - HP 366T User Manual

Using a correctly sized slotted screwdriver, carefully remove the two board lock screws located at the
1.
top and bottom of the connector.
Remove the standard profile bracket and place the low profile bracket over the connector. Be careful
2.
not to damage the connector or bind the low profile bracket to the connector.

Connecting the network cable

To secure the cable, plug the cable connector into the RJ-45 port. Ensure that the tab on the plug clicks into
position indicating that it is properly seated.
For more information, see "UTP cable specifications (on page 11)".
Installing an adapter 10