Accessibility Settings; Allow Other Devices To Discover This Computer; Control The Types Of Devices That Are Allowed To Connect To This Computer; Choose An Audio Notification File - HP Bt500 User Manual

Click Apply to implement the changes. A dialog box is displayed with notification that the
Bluetooth device attached to this computer must be reset before the change(s) will take
effect.
Click Yes to reset the Bluetooth device now. All open Bluetooth connections will be
closed.
Click No to save the changes. The changes will be applied the next time the Bluetooth
device is reset or restarted.

Accessibility settings

The Accessibility tab of the Bluetooth Configuration Panel lets you specify whether remote
devices may access this computer, which remote devices have access, and whether an
audio warning is played when a Personal Identification Number (PIN code) is required.

Allow Other Devices to Discover this Computer

Select Let other Bluetooth devices discover this computer to permit remote Bluetooth
devices to find and report this computer. If Allow No devices (below) is selected, this
option is not available.

Control the Types of Devices that are Allowed to Connect to this Computer

From the Devices allowed to connect to this computer shortcut menu, select:
• No devices: No remote devices are permitted to initiate a connection with this
computer. However, this computer can still initiate connections with remote Bluetooth
devices.
• All devices: All remote devices are permitted to connect to this computer. Connections
are subject to additional security restrictions, such as authentication and
authorization, which may be required by the individual services provided by this
computer.
• Only devices listed below - only the listed devices are allowed to connect to this
computer (see Accessibility, adding and deleting devices).

Choose an Audio Notification File

When Secure Connection is enabled for any of the Bluetooth services on this computer
a PIN code is required before that service can be accessed. To chose a notification sound
that will play when a remote device attempts to access a service that requires a secure
connection, click Select audio file and select the sound (*.wav) file to be played.

Limit Access to this Computer to Specific Remote Devices

From the Bluetooth Configuration Panel, Accessibility tab, in the Allow menu, select Only
devices listed below.
To add a device to the list:
1. Click Add Device
2. In the Devices with access dialog box select the desired devices, and then click OK.
NOTE: Multiple devices may be selected using SHIFT + click and/or CTRL + click.
Configure Bluetooth 45