Extron electronics CrossPoint Plus 84HV User Manual page 48

Programmer's Guide, cont'd
Command/response table for SIS commands (Cont'd)
Command
Start direct write of global presets
End direct write of global presets
Quick recall preset
1. This sequence of commands forces the switcher to perform a complete backplane switch
within 60 msecs of receipt of the Quick recall command.
2. The switcher ignores any invalid command or non-switching commands received between
the Start and End commands.
3. If there is no activity for 5 seconds, the switcher returns the timeout (E17) error.
4. The switcher disables front panel switching during this sequence of commands.
5. The switcher returns the invalid command (E10) error if it receives the End command
without the start command or the Quick recall command without a prior direct preset write.
6. The switcher must receive the Quick recall command within 100 msecs of the End
command.
Example:
Video mute commands
Video mute
Video unmute
Read video mute
Global RGB mute
Global RGB unmute
Audio mute commands
Audio mute
Audio unmute
Read audio mute
Global audio mute
Global audio unmute
Executive mode
Lock front panel
Unlock front panel
Resets
Reset global presets
Reset delays
Reset audio levels
Reset grouping
4-6 CrossPoint Plus Matrix Switchers • Programmer's Guide
ASCII Command Response
(host to switcher) (switcher to host)
P Write Preset
Esc X11
{Tie commands}
p End Write Preset
Esc
.
Rpr
Esc X11
P14 Write Preset 14 Ready
Esc
1*3!
7*8%
10*4&
12*4$
p End Write Preset 14
Esc
.
Rpr
Esc X11
*1B Vmt *1
X2 X2
*0B Vmt *0
X2 X2
B
X2 X13
1*B Vmt1
0*B Vmt0
*1Z Amt *1
X2 X2
*0Z Amt *0
X2 X2
Z
X2 X13
1*Z Amt1
0*Z Amt0
X Exe1
x Exe0
zG ZapG••
Esc
zD ZapD••
Esc
zA ZapA••
Esc
zP ZapP••
Esc
Additional description
Ready Allows direct entry of presets.
X11
{Define ties for preset.}
Saves directly written presets.
X11
Command character is a period.
Creates new preset 14 with:
A & V Input 1 tied to output 3.
Video input 7 tied to output 8
RGB input 10 tied to output 4
Audio input 12 tied to output 4.
Stops entry, saves preset 14.
Recalls the preset.
Mute output
X2
off).
Unmute output
on).
1= mute on, 0 = mute off.
Mute output
X2
off).
Unmute output
X2
on).
1= mute on, 0 = mute off.
Enable executive mode.
Disable executive mode.
Clear all global presets.
Reset all switch intervals to 0 sec.
Reset all audio levels to 0dB.
Reset all I/O grouping.
1 .
1 .
video (video
video (video
X2
video (audio
video (audio