Starting A Repeater Loopback - Paradyne 3162 User Manual

Starting a Repeater Loopback

"
3162-A2-GB20-40
The Repeater Loopback command (RLB) loops the signal being sent to the
network back to the DTE Drop/Insert (DSX-1) and data ports. The signal is
looped back as close to the network interface as possible (after it has passed
through the framing circuitry of the DSU/CSU). Framing CRCs and BPVs are
corrected.
DSU
DTE
(DSX-1)
PORT 1 PORT 2
Procedure
To perform a Repeater loopback:
1. From the Main Menu screen, select Test.
2. From the Test screen, select Network & DTE Tests.
3. For the Repeater Loopback command (under Local Loopbacks), select Start.
August 2000
CSU
NETWORK
INTERFACE
RLB
ALL 1s
496-14318-02
Monitoring and Testing
5-23