Test Jacks - Paradyne 3162 User Manual

Test Jacks

"
TERMINAL
EQUIPMENT
(DTE)
3162-A2-GB20-40
Six test jacks (Figure 5-1) are located on the front panel. The DSU/CSU test jack
functions are shown in Figure 5-2 and described in
Test Jack branch of the asynchronous terminal menu tree (see
allows you to select either Equipment (EQPT) or Network (NET) functionality for
the Monitor test jack.
Procedure
To select either Equipment or Network for the Monitor test jack:
1. From the Main Menu screen, select Control.
2. From the Control screen, select Select Monitor Jack.
3. Select either EQPT (Equipment) or NET (Network) depending on the type of
Monitor test jack that you want to implement.
NET MON EQPT
In In In
Out Out Out
496-14808
Figure 5-1. Test Jacks
EQPT NET
In Out
Mon Jack: EQPT
LINE
RECEIVER
Mon Jack: EQPT
EQPT NET
Out In
Figure 5-2. Test Jack Block Diagram
August 2000
Table 5-9. The Selectable
MON
In
Mon Jack: NET
(Selectable)
INTERNAL LINE
CIRCUITRY
RECEIVER
(Selectable)
Mon Jack: NET
MON
Out
Monitoring and Testing
Appendix A)
NETWORK
496-14875
5-17