Advertisement
Microsoft Windows 95
SR2.5
Connecting to a Netware
4.11 Server
4 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter
Microsoft Windows 95 SR2.5
4 Installing the 3COM Etherlink III 3C590 PCI 10BT Network
Adapter
Requirements
• HP Vectra with Windows 95 SR2.5.
• 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver-
sion 5.2.2.
• Driver File: EL59X.SYS, version 1.22.
• Microsoft Windows 95 SR2.5 media.
• Novell Netware 4.11 Server that supports IPX network protocol.
• Novell Client for Windows 95 v2.5 installation media.
Device Configuration
Device Configuration
Interrupt
I/O Address
Procedure
1 With the HP Vectra turned off, install the 3COM 3C590 network adapter
into a PCI slot.
2 Connect network cable media to the 3COM 3C590 network adapter.
3 Reboot the system to Windows 95SR2.5.
4 Windows 95SR2.5 will automatically recognize the 3COM 3C590 network
adapter as "3Com 3C590 EtherLink III".
5 Insert the 3COM 3C590 driver disk in the floppy drive and click on "Next"
from the Update Device Driver Wizard dialog box.
6 When Windows 95 detects the updated driver, "3Com EtherLink III
3C590", click on "Finish".
Vectra Vli8
05
03
210
210
Vectra VEi7
Vectra VEi8
07
210
Advertisement
