Advertisement
10 Click on the "Install Microsoft Windows Network:" option, and click "OK".
11 Click on the "Drivers" button from the "Network Setup" dialog box, and
click on "Add Adapter".
12 Click "OK" to accept the default choice of "Unlisted or Updated Network
Adapter".
13 Type the path "A:\WFW311" in the "Install Driver" dialog box, and then
insert the 3COM 3C509B driver disk into the floppy drive, and click "OK".
14 Select "3COM EtherLink III (3C5X9)" in the "Unlisted or Updated
Network Adapter" dialog box, and click "OK".
15 Accept the applicable network protocols, and then click on "CLOSE".
(Contact your network administrator if you do not have the required
information).
16 At the "Network Setup" dialog box, click on "OK".
17 Specify your User Name, Workgroup, and Computer Name in "Microsoft
Windows Network Names" dialog box, and click on "OK". (Contact your
network administrator if you do not have the required information).
18 At the "Network Setup" dialog box, click on "OK".
19 To complete the installation, remove the 3COM 3C509B driver disk from
the floppy drive and click on "Restart Computer" button in the "Windows
Setup" dialog box.
12 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter
Connecting to a Windows NT 4.0 Server
Advertisement
