Advertisement
8 Log onto Windows NT3.51 Workstation with administrator privileges
(Contact your network administrator if you do not have the required
information).
9 Open the "Network" icon in the "Control Panel" program group.
10 Click on "YES" in the "Network Settings" dialog box to install Windows NT
Networking.
11 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive.
12 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the
Windows NT 3.51 CD) in the dialog-box of the Windows NT Setup window
and click on "Continue".
13 Click on the "Do Not Detect" button from the "Network Adapter Card
Detection" window, and click on the "Continue" button in the following
"Network Adapter Card Detection" window.
14 From the "Drop Down List", scroll down and select "<Other> Requires
disk from manufacturer", then click on "Continue".
15 Set the path to "A:\" in the "Insert Disk" dialog box, and then insert the
3COM driver disk in the floppy drive and click "OK".
16 Select "3COM Etherlink (3c509) ISA Adapter" in the "Select OEM
Option" dialog box, and click "OK".
17 Select ISA for the BUS Type and click on "OK".
18 Choose the appropriate network protocols by clicking the check boxes in
the "Windows NT Setup" dialog box and click on the "Continue" button
(Contact your network administrator if you do not have the required
information).
19 Press "OK" to continue form "Network Settings" dialog box.
20 If applicable, press "OK" to continue form "NWLink IPX/SPX Protocol
Configuration" dialog box.
21 At the "Domain/Workgroup Settings" dialog box, click on "OK" to accept
the default "Workgroup" as your workgroup name.
22 To complete the installation, remove the floppy disk, and click on "Restart
computer" in the "Windows NT Workstation Networking Setup" dialog
box.
23 Install the Windows NT3.51 Service Pack 5 application.
10 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter
Connecting to a Windows NT 4.0 Server
Advertisement
