Advertisement
5 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter
Connecting to a Windows NT 3.51 Server
26 Specify your Computer Name, Workgroup or Domain (Contact your
network administrator if you do not have the required information) and
click on "Next".
27 Click on "Finish" to complete the installation.
28 Remove the 3Com driver disk from the floppy drive and select "Yes" at the
prompt to shut down and restart your computer for the new settings to
take effect.
29 Log onto Windows NT4 Workstation with administrator privileges.
30 Install the Windows NT4 Service Pack 4 application to correct the error
messages in the Event Viewer.
31 Install the Hewlett-Packard Soft-Power Down application once the
Service Pack 4 has been installed.
Advertisement
