Navigating And Selecting In The Setup Utility; Displaying System Information - HP Compaq V3000 Maintenance And Service Manual

Navigating and Selecting in the Setup Utility

Because the Setup Utility is not Windows-based, it does not
support the TouchPad. Navigation and selection are by keystroke.
■
To choose a menu or a menu item, use the arrow keys.
■
To choose an item in a drop-down list or to toggle a field,
for example an Enable/Disable field, use either the arrow
keys or
■
To select an item, press
■
To close a text box or return to the menu display, press
■
To display additional navigation and selection information
while the Setup Utility is open, press

Displaying System Information

The following procedure explains how to display system
information in the Setup Utility. If the Setup Utility is not open,
begin at step 1. If the Setup Utility is open, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in
Windows, and then press
to enter setup," is displayed in the lower-left corner of the
screen.
2. Access the system information by using the Main menu.
3. To close the Setup Utility without changing any settings, use
the arrow keys to select Exit > Exit Discarding Changes,
and then press
Maintenance and Service Guide
or .
f5 f6
. (The computer restarts in Windows.)
enter
.
enter
f1
while the prompt, "Press <F10>
f10
Troubleshooting
.
.
f1
2–3