HP Compaq V3000 Maintenance And Service Manual page 41

System Configuration Menu
Select
Language Support
Enhanced SATA support
(select models only)
Boot Options
Button Sound
(select models only)
Video memory up to
(select models only)
Maintenance and Service Guide
Table 2-7
System Configuration Menu
To Do This
Change the Setup Utility language.
Enable/disable enhanced SATA mode.
Set the following boot options:
■
f10 and f12 Delay (sec.)—Set the delay for the
f10 and f12 functions of the Setup Utility in
intervals of 5 seconds each (0, 5, 10, 15, 20).
■ CD-ROM boot—Enable/disable boot from
CD-ROM.
■
Floppy boot—Enable/disable boot from Floppy.
■ Internal Network Adapter boot—Enable/disable
boot from Internal Network Adapter.
■
Boot Order—Set the boot order for:
❐ USB Floppy
❐ ATAPI CD/DVD ROM Drive
❐ Hard drive
❐
USB Diskette on Key
❐
USB Hard drive
❐
Network adapter
Enable/disable the Quick Launch Button tapping
sound.
Select the amount of video memory.
Troubleshooting
2–15