Novatel MiFi 2 User Manual page 18

To charge the battery:
➊
Connect the A/C charger to the USB cable and plug into the MiFi 2's micro USB port. The
charging battery status icon
battery is charging.
➋
When the battery is fully charged, the message "Battery is fully charged, please disconnect
power." displays on the touchscreen. Remove the USB cable from the MiFi 2's micro USB
port. When disconnected from power and fully charged, the battery status icon displays fully
charged
IMPORTANT
The battery door cover on your MiFi 2 lifts off to open and snaps on to close. No
tools are required to remove or install the battery or battery door. Using any type of tool could
result in damage to the device and to the battery. If excessive force appears necessary to remove
the door or the battery, please return the MiFi 2 to the vendor where you purchased the device.
.
displays on the MiFi 2 touchscreen status bar while the
17