Power; Figure 3-2. Front View Of The Fibre Channel To Scsi Router; Rear View Of The Fibre Channel To Scsi Router - HP FIBRE CHANNEL TO SCSI ROUTER M8201R Installation And User Manual

Installing the Fibre Channel to SCSI Router for the
NonStop NS-Series Server
3. Connect one end of the fiber cable to the small form-factor pluggable (SFP) on the
unit. See Figure 3-3
4. Attach the power cord to the AC power receptacle on the Fibre Channel to SCSI
router. See
outlet.
Note. The router does not have protection against lightning surges. Customers in high risk
areas should use external surge protection rated for use in their location and be able to handle
the power demand of the router.

Figure 3-2. Front View of the Fibre Channel to SCSI Router

Figure 3-3. Rear View of the Fibre Channel to SCSI Router
AC Power
Receptacle
M8201R Fibre Channel to SCSI Router Installation and User's Guide —529971-005
for the location.
Figure 3-3 for the location. Then plug the other end into an AC power

Power

Small Form-Factor
Switch
Pluggable (SFP)
Port 0
Port 1
3 -3
Installation