Installing The Fibre Channel To Scsi Router For The Nonstop Ns-Series Server; Installation; Table 3-1. Scsi Cable Part Numbers And Descriptions - HP FIBRE CHANNEL TO SCSI ROUTER M8201R Installation And User Manual

3
Installing the Fibre Channel to SCSI
Router for the NonStop NS-Series
Server
This section includes:

Installation

Installation
1. Connect the small end of the SCSI cable to the Fibre Channel to SCSI router on
port 0. For the port location, see
Note. In this example port 0 is being used to connect the tape drive. Both ports on the
Fibre Channel to SCSI router are available for use if needed.

Table 3-1. SCSI Cable Part Numbers and Descriptions

Product Part
Number Number
520-001 529794-001
520-003 529795-001
520-010 529796-001
520-015 529797-001
520-020 529798-001
520-023 529799-001
M8201R Fibre Channel to SCSI Router Installation and User's Guide —529971-005
Figure 3-3
Description
CBA, 1 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
CBA, 3 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
CBA, 10 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
CBA, 15 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
CBA, 20 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
CBA, 23 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
3 -1
3-1
on page 3-3.