Power Button Board - HP PAVILION G6 Maintenance And Service Manual

Power button board

Description
Power button board
Before removing the power button board, remove the following components:
1. Battery (see
2. Service access cover (see
3. Hard drive (See
4. Optical drive (see
5. WLAN module (see
6. Memory module (see
7. Keyboard (see
8. Top cover (see
Remove the power button board:
1. Turn the top cover upside down with the rear edge toward you.
2. Remove the Phillips 3.0 x 2.0 screw (1) that secures the power button board to the top cover.
3. Lift up and remove the power button board (2).
Reverse this procedure to install the power button board.
Battery on page 37)
Service access cover on page
Hard drive on page
Optical drive on page
WLAN module on page
Memory module on page
Keyboard on page 47)
Top cover on page 49)
38)
39)
41)
43).
45)
Component replacement procedures
Spare part number
640884-001
53