Keyboard - HP PAVILION G6 Maintenance And Service Manual

Keyboard

Description
For use in the United States, Black
For use in French Canada, Black
For use in the United States, Pink
For use in French Canada, Pink
Before removing the keyboard, remove the following components:
1. Battery (see
2. Service access cover (see
Remove the keyboard:
1. Remove the Phillips 4.0 x 2.5 screw (1) in the WLAN module bay that secures the keyboard to
the computer.
2. Using a thin, flat-bladed screwdriver, gently pry loose the three snaps (2) inside the battery bay
to release the top edge keyboard tabs.
3. Turn the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
5. Lift the rear edge of the keyboard, and then tilt the keyboard forward onto the palm rest (1).
6. Release the zero insertion force (ZIF) connector (2) to which the keyboard cable is attached, and
then disconnect the keyboard cable (3) from the system board.
Battery on page 37)
Service access cover on page
Spare part number
640892-001
640892-121
651083-001
651083-121
38)
Component replacement procedures 47