Handling Errors And Problems; Error Messages - Omron R2 Instruction Manual

5. Handling Errors and Problems

5.1

Error Messages

Error Symbol
Blinks or appears
continuously
Cause
Cuff over
inflated.
Movement
during
measurement.
The wrist cuff is
not fastened
securely.
An E mark with
a code/number
indicates the
device has a
hardware
failure.
The battery
power is low.
Correction
Repeat measurement.
Remain still and do not move
during measurement. (Refer
to "3.3 Taking a Reading".)
Carefully read and repeat the
steps listed under "3.1
Applying the Wrist Cuff".
Consult your OMRON
retail outlet or distributor.
Replace the batteries with
two new "AAA" alkaline
(LR03) batteries.
EN EN
19